This is the higest energy density commercially avaliable drone battery on the market today!
Buy now and ships within 2 business days!
 
How to use:
These new Silicon anode based batteries can be charged just like a LiPo or LiIon, to 4.2V/cell. We recommend landing at 2.7V per cell, or 21.6V for this pack.
 
Integration Notes:
Battery should have access to constant airflow during use and during charging. Charge and discharge power and current rating is limited by the amount of airflow over the battery during flight. Cell skin temperature must remain below 70C during use
 
Electrical Specifications:
Nominal Voltage: 27.2V
Capacity: 21600mAh
Watt Hours: 587Wh
Constant Discharge Power: 1200W Airflow Determined
Constant Discharge Current: 45A Airflow Determined
Burst Current: 100A for 10 seconds Airflow Determined
 
Charge Rate:
15A Nominal
 
Voltage Parameters:
Max voltage: 33.6V pack, 4.2V per cell
Min voltage: 20.4V pack, 2.55V per cell
Storage voltage: 28V pack, 3.5V per cell
Landing voltage: 22V pack, 2.75V per cell
 
Temperature sensor: JST-XH 2 pin
NTCLE413E2103F106A
 
 
Mechanical Specifications:
Cell: Amprius SA08
Configuration: 8s4p
 
Energy Density Specs:
Weight: (±4g) 1800g
Cell Energy Density: 360Wh/kg
Pack Energy Density: 338Wh/kg
Pack Power Density: 692W/kg
Pack Volume: 1260cm^3
Pack Volumetric Density: 0.699Wh/cm^3
 
Connectors:
Balance Plug: JST-XH-7P, 22AWG
Discharge Plug: XT60 or XT90, 13 AWG cable
 
Dimensions: 15.4 x 10.6 x 5.8 cm, LWH
 
Maximum Cell Temperature Range
-20C/0F - 70C/165F