New! Molicel P50b cell option! See "datasheets" page for more information on this cell
 
Integration Notes:
Battery should have access to constant airflow during use and during charging. Charge and discharge power and current rating is limited by the amount of airflow over the battery during flight. Cell skin temperature must remain below 80C during use
 
Electrical Specifications:
Capacity: 27000mAh
Watt Hours: 583Wh
Cell Energy Density: 244Wh/kg
Pack Energy Density: 225Wh/kg
Discharge Power: 2000W, Airflow Determined
Discharge Current: 150A, Airflow Determined
Burst Current: 250A for 10 seconds, Airflow Determined
 
Charge Rate: Normal: 30A, Rapid 40A, Airflow Determined
 
Voltage Parameters:
Max voltage: 25.2V pack, 4.2V per cell
Min voltage: 15.3V pack, 2.55V per cell
Storage voltage: 21V pack, 3.5V per cell
Landing voltage: 16.5V pack, 2.75V per cell
 
Mechanical Specifications:
Cell: Molicel P45B
Configuration: 6S6P 
 
Energy Density Specs:
Weight(±8g): 2590g
Cell Energy Density: 241Wh/kg
Pack Energy Density: 218Wh/kg
Pack Power Density: 863W/kg
 
Connectors:
Balance Plug: JST-XH-7P
Discharge Plug: XT90/AS150U
 
Dimensions: 6.5cm x 8.7cm x 15.5cm (H x W x L)
 
Maximum Cell Temperature Range:
-17C/0F - 80C/175F