New! Molicel P50b cell option! See "datasheets" page for more information on this cell
 
Integration Notes:
Battery should have access to constant airflow during use and during charging. Charge and discharge power and current rating is limited by the amount of airflow over the battery during flight. Cell skin temperature must remain below 80C during use
 
Electrical Specifications:
Capacity: 500mAh
Watt Hours: 108Wh
Discharge Power: 675W, Airflow Determined
Discharge Current: 30A, Airflow Determined
Burst Current: 50A for 10 seconds, Airflow Determined
 
Charge Rate: 8 Amps Normal, 12A Rapid, Airflow Determined
 
Voltage Parameters:
Max voltage: 25.2V pack, 4.2V per cell
Min voltage: 15.3V pack, 2.55V per cell
Storage voltage: 21V pack, 3.5V per cell
Landing voltage: 16.5V pack, 2.75V per cell
 
Mechanical Specifications:
Cell: Molicel P50B
Configuration: 6S1P
 
Energy Density Specs:
Weight(±3g): 434g
Cell Energy Density: 255Wh/kg
Pack Energy Density: 248Wh/kg
Pack Power Density: 1.5kw/kg
 
Connectors:
Balance Plug: JST-XH-7P, 49mm lead, 22AWG
Discharge Plug: XT60, 94mm lead, 12AWG
 
Dimensions: 15.6cm x 7.2cm x 7.2cm (L x W x H)
 
Maximum Cell Temperature Range:
-17C/0F - 80C/175F