New! Molicel P30b cell option! See "datasheets" page for more information on this cell
 
Integration Notes:
Battery should have access to constant airflow during use and during charging. Charge and discharge power and current rating is limited by the amount of airflow over the battery during flight. Cell skin temperature must remain below 80C during use
 
Electrical Specifications:
Capacity: 2800mAh
Watt Hours: 63Wh
Discharge Power: 400W Airflow Determined
Discharge Current: 20A Airflow Determined
Burst Current: 40A for 10 seconds Airflow Determined
 
Charge Rate: 4 Amps Normal, Airflow Determined
 
Voltage Parameters:
Max voltage: 25.2V pack, 4.2V per cell
Min voltage: 15.3V pack, 2.55V per cell
Landing voltage: 16.8V pack, 2.8V per cell
 
Mechanical Specifications:
Cell: Molicel P28A
Configuration: 6S1P long
 
Energy Density Specs:
Weight(±2g): 298g
Cell Energy Density: 225Wh/kg
Pack Energy Density: 211.2Wh/kg
Pack Power Density: 1340W/kg
Pack Volume: 130.36cm^3
Pack Volumetric Density: 0.483Wh/cm^3
 
Connectors:
Balance Plug: JST-XH-7P, 22AWG
Discharge Plug: XT60, 14AWG
 
Dimensions: 13.8cm x 3.52cm x 3.52cm (L x W x H)
 
Maximum Cell Temperature Range:
-17C/0F - 80C/175F