This is the higest energy density commercially avaliable drone battery on the market today!
Buy now and ships within 2 business days!
 
How to use:
These new Silicon anode based batteries can be charged just like a LiPo or LiIon, to 4.2V/cell. We recommend landing at 2.7V per cell, or 32.4V for this pack.
 
Integration Notes:
Battery should have access to constant airflow during use and during charging. Charge and discharge power and current rating is limited by the amount of airflow over the battery during use. Cell skin temperature must remain below 70C during use
 
Electrical Specifications:
Nominal Voltage: 40.8V
Capacity: 10,800mAh
Watt Hours: 440.64Wh
Constant Discharge Power: 1250W Airflow Determined
Constant Discharge Current: 32A Airflow Determined
Burst Current: 86A for 10 seconds Airflow Determined
 
Charge Rate: 10 Amps Nominal, 20 Airflow Determined
 
Voltage Parameters:
Max voltage: 50.4V pack, 4.2V per cell
Min voltage: 30.60V pack, 2.55V per cell
Storage voltage: 40.8V pack, 3.4V per cell
Landing voltage: 16.5V pack, 2.75V per cell
 
Mechanical Specifications:
Cell: Amprius SA08
Configuration: 12s1p
 
Energy Density Specs:
Weight: (±4g) 1332g (xt60) 1335g (XT90)
Cell Energy Density: 360Wh/kg
Pack Energy Density: 330Wh/kg
Pack Power Density: 970W/kg
Pack Volume: 673cm^3
Pack Volumetric Density: 0.616Wh/cm^3
 
Connectors:
Balance Plug: JST-XH-7P, 22AWG
Discharge Plug: XT60 or XT90, 12AWG or 10AWG
 
Dimensions: 5.3 x 15.3 x 8.2 cm,  H x L x W 100% SoC
 
Maximum Cell Temperature Range:
-20C/0F - 70C/165F